Calcification of degenerating tissues in the periodontal ligament during tooth movement

OBJECTIVE: Calcification of degenerating tissues in the periodontal ligament (PDL) during tooth movement was investigated longitudinally. MATERIALS AND METHODS: Upper first molars of male Wistar rats were moved lingually for 1, 7 and 21 d, following which unfixed undecalcified sections of the lingual PDL (in the pressure zone) were examined histologically, histochemically (autoradiography and electron probe microanalysis). RESULTS: On d 1 of tooth movement, degenerating tissues, together with some calcified particles, were visible in the pressure zone of the lingual PDL. On d 7, substantial calcified aggregations were seen in the degenerating tissues, predominantly situated between the bone and root. This was confirmed by the 45Ca autoradiography. On d 21 of tooth movement, large calcified aggregations were still clearly evident between the bone and root. CONCLUSIONS: This calcification of the degenerating tissues is a self-defense response of the living body to prevent direct contact between alveolar bone and the tooth root during compression of the PDL, so preventing friction between them and the development of ankylosis.     

联合卡环、延长卡环与套筒冠固位体的基牙位移实验研究

目的　探讨单侧游离端可摘局部义齿的不同固位装置对基牙的影响。方法　在上下牙列间放置食物片 ,应用单侧游离端缺失病例中使用最多的联合卡环、延长卡环和套筒冠作为固位装置。当咬合时 ,用高精度激光位移测量仪测得其基牙各自的位移量 ,进行分析比较。结果　 3种不同固位装置义齿的基牙 45都有牙体移动、倾斜、扭转及垂直向的位移。其位移量在水平扭转时 ,套筒冠为最小 (P <0 0 1 ) ;而垂直向的位移 ,套筒冠则大于联合卡环和延长卡环 (P <0 0 1 )。结论　与联合卡环和延长卡环相比较 ,套筒冠所承受的咬合压力接近牙轴方向并能使基牙力分散 ,受力均匀 ,有利于基牙的健康。     

Anticipatory and reflexive neck muscle activities during voluntary rapid jaw opening and passive jaw depression in humans

The characteristics of head movement during voluntary rapid jaw opening movement and passive jaw depression were investigated using accelerometers and electromyographs (EMG) on eight healthy examinees. Passive depressions were executed by means of load on the lower jaw, initiated either by examinees themselves or an experimenter. In the depression initiated by examinees, a head-extension movement that preceded the load to the lower jaw and anticipatory activities in the nuchal region of the trapezius muscle were observed. In the depression initiated by the experimenter, the anticipatory activities were not observed. In both of these cases, stretch reflexes were induced in the trapezius muscle. During voluntary rapid jaw opening, a head-extension movement nearly synchronized with the opening movement in the lower jaw acceleration, and dorsal-neck muscle activities accompanying the synchronized movement were observed. The peak timing of these neck-muscle activities preceded the latencies of the stretch-reflex activities observed in the jaw-depressed tasks, but no anticipatory activities were observed in the dorsal-neck muscles. We conclude that neither the anticipatory activities nor the reflex activities observed in the passive depressions have effects on the initial part of the dorsal-neck muscle activities, which are related to the head-extension synchronized with the voluntary lower-jaw opening movement.     

Influence of Flask Closure and Flask Cooling Methods on Tooth Movement in Maxillary Dentures

PURPOSE: This study investigated the tooth movement of standardized simulated dentures processed by traditional closure or the new Rafael Saide (RS) tension system when cooled in the curing water itself or in curing water followed by bench storage for 3 hours. MATERIALS AND METHODS: Forty stone casts were formed from a mold of an edentulous maxillary arch. The wax denture record bases were made on the casts; the height of the wax rim occlusion was 20 mm in the labial sulcus of the cast and 10 mm in the posterior region. The upper stone cast was mounted on a Mondial 4000 semi-adjustable articulator with wax rim interocclusal references in relation to the lower stone cast teeth. Metallic pins were placed in the incisal border of the maxillary central incisors (I), labial cusp of the first premolars (PM), and mesiolabial cusp of the second molars (M). The incisor-to-incisor (I-I), premolar-to-premolar (PM-PM), and molar-to-molar (M-M) transversal distances and left incisor-to-left molar (LI-LM), and right incisor-to-right molar (RI-RM) anteroposterior distances were measured before and after denture polymerization with an optical microscope with a tolerance of 0.0005 mm. For traditional closure, the dentures were flasked conventionally in standard metallic flasks, which were afterward placed in spring clamps. For the new RS system closure, the flasks were pressed between the metallic plates of the tension system after the final closure. The Clássico heat-polymerizing acrylic resin dough was packed in the flasks under a final packing pressure of 1.250 kg f. Twelve hours after flask closure, the dentures were polymerized in a moist heat-polymerizing cycle for 9 hours at 74 degrees C. The denture was deflasked after cooling in the water of the polymerizing cycle (groups A and C) or in the water of the polymerizing cycle and then bench-stored for 3 hours (groups B and D). Collected data were analyzed with analysis of variance and Tukey's test (p< 0.05). RESULTS: There was no statistically significant difference (p> 0.05) between the conventional and new RS system closure methods for the transversal distances after polymerization in all studied groups. The anteroposterior distances did not change with deflasking after water bath cooling. There were statistically significant differences (p< 0.05) in the anteroposterior distances with deflasking after water bath cooling and then bench storage for 3 hours. CONCLUSION: Tooth movement was similar in dentures processed by traditional closure and by the new RS tension system, with the exception of the anteroposterior distances when the flasks were cooled in their own curing water and bench-stored for 3 hours.     

Comprehensive gene expression analysis in human periodontal ligaments of the mandibular third molars performing vertical movement and the maxillary second premolars with occlusal contact

OBJECTIVES: The periodontal ligament (PDL) is thought to be an important tissue in vertical movement during tooth eruption, but the precise molecular mechanism is not known. Thereto, comprehensive gene expression was analyzed in human PDL of mandibular third molars performing vertical movement and maxillary second premolars with occlusal contact. DESIGN: The expression profile of 9,243 genes in the PDL of one subject was compared between vertically moving third molars and second premolars with occlusal contact by DNA microarray. RESULTS: The expression of 27 genes showed more than a 10-fold difference between third molars and second premolars. The expression of CALB1 (encoding calbindin 1), CYP26A1 (encoding cytochrome P450, family 26, subfamily A, polypeptide 1), SPOCK3 (encoding testican-3), CCK (encoding cholecystokinin) and SCRG1 (encoding scrapie responsive protein 1) was more than 30-fold higher in PDLs of the third molars than the second premolars. CALB1 is reported to increase at the pressure side of PDL during experimental orthodontic tooth movement in rats. Interestingly, in this study, CALB1 expression showed the largest difference. In contrast, CRCT1 (encoding cysteine-rich C-terminal 1), SPRP3 (encoding small proline-rich protein 3), IL8 (encoding interleukin 8) and MMP12 (encoding matrix metalloproteinase 12) showed more than 100-fold higher expression in PDLs of the second premolars than the third molars. CONCLUSION: The present comprehensive gene expression in PDLs provides new insights into the molecular mechanism during the vertical tooth movement.     

上颌第三磨牙对第一磨牙近中移动影响的研究

目的探讨萌出中的上颌第三磨牙是否会使上颌第一磨牙向近中移动。方法选择18～24岁正畸患者18例,均拔除4颗第一前磨牙矫治,且随机拔除一侧上颌第三磨牙,两侧其余治疗条件保持一致。治疗3个月后观察两侧上颌第一磨牙近中移动量是否存在差异。结果1)拔除上颌第三磨牙的一侧,其上颌第一磨牙在治疗3个月后未发生明显的近中移动;2)未拔除上颌第三磨牙的一侧,其上颌第一磨牙在治疗3个月后的近中移动量为1mm;3)治疗3个月后,未拔除上颌第三磨牙侧的第一磨牙近中移动量大于拔除第三磨牙侧的第一磨牙的近中移动量,其差异有统计学意义(P<0.01)。结论在正畸治疗的初始阶段,若上颌第三磨牙的萌出间隙不足,其萌出会对其近中的上颌第一磨牙产生影响,导致其近中移动而丧失支抗。     

Low-energy laser stimulates tooth movement velocity via expression of RANK and RANKL

OBJECTIVE: Recent studies have demonstrated that low-energy laser irradiation stimulates bone formation in vitro and in vivo. However, very little is known about the effects of laser irradiation on osteoclastogenesis. The receptor activator of the nuclear factor-kB (RANK) / RANK ligand (RANKL) / osteoprotegerin (OPG) system is essential and sufficient for osteoclastogenesis. The present study was designed to examine the effects of low-energy laser irradiation on expressions of RANK, RANKL, and OPG during experimental tooth movement. DESIGN: To induce experimental tooth movement in rats, 10 g of orthodontic force was applied to the molars. Next, a Ga-Al-As diode laser was used to irradiate the area around the moved tooth and the amount of tooth movement was measured for 7 days. Immunohistochemical staining with RANK, RANKL, and OPG was performed. Real time PCR was also performed to elucidate the expression of RANK in irradiated rat osteoclast precursor cells in vitro. RESULTS: In the irradiation group, the amount of tooth movement was significantly greater than in the non-irradiation group by the end of the experimental period. Cells that showed positive immunoreactions to the primary antibodies of RANKL and RANK were significantly increased in the irradiation group on day 2 and 3, compared with the non-irradiation group. In contrast, the expression of OPG was not changed. Further, RANK expression in osteoclast precursor cells was detected at an early stage (day 2 and 3) in the irradiation group. CONCLUSION: These findings suggest that low-energy laser irradiation stimulates the velocity of tooth movement via induction of RANK and RANKL.     

Head movement associated with performance of mandibular tasks

summary   The present study was designed to examine the hypothesis that the motor system controlling phonation is functionally coupled with the motor system controlling posture of the head and neck, as previously suggested (U. Haddar, T.J. Steiner, E.C. Grant and F.C. Rose Human Movement Science 2: 35 and Language and Speech 26: 117). Head tilt and trunk drift in the antero-posterior and right–left directions were measured simultaneously for 20 s before and during three types of speech sounds (/pa/, /ta/ and /ka/) as well during a maximum jaw open-close task in 14 healthy young subjects. The major findings obtained in all of the four tasks were: (i) the trunk drift measured in both directions was negligible in comparison with the head tilt; (ii) the head tilt in the antero-posterior direction was much larger than in the right–left direction and (iii) the head tilt during performance of the four tasks consisted of 'initial' and 'sustained' phases. In the initial phase, the head tilted posteriorly in association with the start of individual tasks. In the sustained phase, the head tilted either anteriorly or posteriorly when the task progressed. The magnitude of the net head tilt in the sustained phase negatively correlated with that of the initial head tilt. These findings indicate that phonation, in the form of jaw open-close, accompanies head movement in two consecutive phases.     

Three-dimensional motion analysis - an exploratory study. Part 1: assessment of facial movement

Authors – Popat H, Richmond S, Playle R, Marshall D, Rosin PL, Cosker D Objectives – To objectively quantify facial movement in response to facial expression and spoken word. Design – Experimental study. Setting – Department of Dental Health and Biological Sciences, University Dental Hospital, Cardiff, UK. Experimental Variable – Facial movement was assessed in response to a standardized smile expression and the utterance ‘puppy’. The sequences were recorded using a non‐invasive, three‐dimensional motion analysis image capture system (3dMDface? Dynamic System) at 48 frames per second. Outcome Variable – To quantify the facial movement, sequential frames of a sequence were aligned to the baseline/reference frame three‐dimensionally using best fit on non‐moveable points in the upper half of the face. Accuracy of the alignment process for each sequence was tested using the percentage of stable points (i.e. within ±0.5 mm) within the upper half of the face. Results – Quantifiable changes in facial topology were seen during both the standardized smile expression and the utterance ‘puppy’. The mean percentage of points (SD) that remained stable within the upper half of the face during the utterance ‘puppy’ was 88.8% (4.7). During the standardized smile expression, there were a much lower percentage of stable points in the upper half of the face with a mean (SD) of 60.9% (3.2). Conclusion – The 3dMDface? Dynamic System allows objective, three‐dimensional, non‐invasive assessment of facial movement. The utterance ‘puppy’ is a more appropriate measure of facial movement when compared with the standardized smile expression.     

Association between food mixing ability and mandibular movements during chewing of a wax cube

The purpose of this study was to clarify whether masticatory movements during chewing of a wax cube associate with food mixing ability. Twenty-six dentate subjects (mean age 25.3 years) were directed to chew a two-coloured paraffin wax cube for 10 strokes on preferred chewing side. Mixing Ability Index (MAI) was determined from the colour mixture and shape of the chewed wax cube. MAI was employed as an estimate of food mixing ability. Mandibular movements during chewing of the wax cube were recorded using a six-degrees-of freedom jaw movements recording system, and motion of a lower incisal point of the mandible was computed. Twelve parameters of masticatory movements in relation to mandibular excursion, angle, velocity, cycle duration, duration of each phase were measured for each masticatory cycle. In addition, unilateral maximum biting was performed, and the maximum force during biting was measured using a force-transducer. A multiple regression analysis identified vertical amplitude, closing duration, closing angle and maximum bite force as significant predictors accounting for 63% of inter-subject variation (adjusted R(2)) in the MAI (P < 0.05). Only some parameters of masticatory movements seem to have an influence on the MAI in dentate subjects.